The classification of band sawing machines is actually divided into horizontal metal band sawing machines, vertical metal band sawing machines, and horizontal and also divided into scissors type, double column and single column type band sawing machines according to the structure; and according to the application The situation is actually divided into manual and economical manual feeding of materials that are manually cut, and automatic; generally based on some automated procedures using the controller, it can actually be divided into manual and semi-automatic manual feeding, and automatic type That is, automatic feeding and automatic cutting; the root is generally divided into viewpoints according to the requirements of the viewpoint of cutting, and it can cut the viewpoint of 90 degrees and 45 degrees, and generally it is a vertical cutting of 90 degrees without the viewpoint.
The general hydraulic transmission system is actually a hydraulic circuit composed of pumps, valves, cylinders, tanks, pipelines, etc., and some lifting of the saw beam and some clamping of the workpiece are completed under electrical control. And through the speed control valve, the stepless speed regulation of the feed speed can be implemented, so as to meet the sawing requirements for workpieces of different materials.
The electrical control system consists of a control circuit composed of an electrical box, a control box, a junction box, a travel switch, an electromagnet, etc., which is used to control the reversal of the saw blade, the lifting of the saw beam, and the clamping of the workpiece to make it follow a certain operating procedure To complete the normal cutting cycle. The lubrication system must be lubricated according to the lubrication parts of the machine tool (wire brush shaft, worm gear box, automatic bearing seat, worm bearing, lifting cylinder upper and lower shaft, and movable vise sliding surface clamping screw) requirements before starting. The worm gear and worm in the worm gear box are lubricated by No. 30 engine oil bath, which is injected from the oil plug hole on the upper part of the worm gear box. The box surface is equipped with an oil mark. When the saw beam is at the lowest position, the oil level should be on the oil mark. The quality of the day has improved, and the level of construction has naturally advanced a lot. The connection between the two influences and restricts each other. In the construction market, the use of various new materials also promotes the improvement of our quality of life. Take the band saw machine as an example, its development prospects are still appropriate and good. However, as manufacturers improve quality, they also need to comply with strict inspection guidelines and improve their own technical level. The price of band sawing machine is fairly stable, let us accept it. The improvement of the product quality of band saws can make it more widely used, reduce energy consumption, and can also ensure the development of low-carbon and environmentally friendly construction operations and promote the harmonious development of society. Now that the quality of buildings has improved, the issue of insulation and flame retardant materials cannot be ignored.
WeChat consultation
中文
Message
Sitemap
