The horizontal band sawing machine, adjustable view point sawing machine, vertical band sawing machine, CNC band sawing machine, gantry band sawing machine, shearing band sawing machine, small band sawing machine and other series of sawing machines produced, mostly use closed fuel tanks, and set up at the entrance. Filter. During the application process, prevent the intrusion of moisture, emulsion, dust, fiber debris and other mechanical debris. The oil volume of the hydraulic oil tank should be kept within the designated oil level plan after the pipes and components of the sawing machine system are filled with oil. Before the hydraulic system of the band saw machine is put into use, it must be severely cleaned. Severe filtration is necessary when refueling. The band saw machine must always check the oil filter, replace it immediately if it becomes dirty, and check the quality of the hydraulic oil as scheduled. The technical department specially reminds our customers that if your band sawing machine is to work normally, its hydraulic system must pay attention to the following three questions:
1. Oxidation degree of hydraulic oil of band saw machine
If the color of the hydraulic oil of the band saw machine is dark brown and has a foul odor, it indicates that it has been oxidized. The darker the brown, the stronger the foul odor, indicating that the degree of oxidation is more fierce. In this case, replace with new oil. The servo azimuth control module of the sawing machine system selects the azimuth control that combines sampling interpolation and predictive control. Because of electromagnetic mechanical hysteresis and motion inertia, it is almost impossible to control the feeding slide to move 0.1mm through "on" and "off".
Second, the water content of the hydraulic oil of the band saw
If the hydraulic oil of the sawing machine is milky white and the smell has not changed, indicating that there is too much water mixed in, take a small amount of hydraulic oil and drop it on the hot iron plate.
3. Impurity content in hydraulic oil of band saw machine
Put a few drops of hydraulic oil in the sawing machine mailbox on your hand and twist it with your fingers. If there are more metal particles or flashes, it proves that the hydraulic oil is rich in mechanical impurities. It must be deposited on 42# hydraulic oil, and then filtered and used. Replace the hydraulic oil when ordered. After shutting down, operate the work equipment to put it in a high position, turn off the main idea, use the hydraulic oil's own weight, and drain the oil to clean the oil tank and pipeline when the hydraulic oil is hot.
Our company specializes in producing various types of sawing machines with superior sawing effect and advanced technical performance. The products are sold all over the country. It is your best choice for sawing materials. Welcome to inquire and order from all walks of life. The hydraulic transmission system of the band saw machine consists of a hydraulic circuit composed of pumps, valves, cylinders, oil tanks, pipelines and other auxiliary parts. The lifting of the saw beam and the clamping of the workpiece are completed under electrical control. Through the speed control valve, the stepless speed regulation of the feed speed can be implemented to meet the sawing requirements of different raw materials. The CNC sawing machine is driven by the automatic wheel and the driven wheel to operate the saw blade, and the cutting direction of the saw blade is controlled by the guide rail control frame. After adjusting the rotation bearing, the band saw blade is straightened and straightened, and the saw is swept away by the sweeper. The hydraulic cylinder piston rod supports the guide rail to control the frame to fall into the sawing material. The band saw machine is equipped with a manual or hydraulic cylinder clamping and locking mechanism, and a hydraulic operating valve switch.
WeChat consultation
中文
Message
Sitemap
