The difference between angle sawing machine and scissor sawing machine lies in their components, and their functions and characteristics are different. Nowadays, angle sawing machine has become an indispensable mechanical equipment in industrial machinery and equipment. It not only improves industrial production efficiency, but also reduces the time and cost in industrial production. Therefore, in industrial production, choose shopping super The value of the angle sawing machine is very necessary.
Today Rimin focuses on introducing to you, the angle sawing machine and the scissors metal band sawing machine, what are their structural characteristics and advantages? Where are the differences between the two? The following content is a specific introduction, and the following is a brief understanding.
The main transmission system of the scissors-type band saw is composed of a worm gear reducer, a belt pulley, a driving wheel and other parts. The worm gear reducer and the driving wheel are directly connected, and the transmission is relatively stable without impact. The speed of the driving wheel is adjusted by the leather belt, which can reach a variety of cutting speeds to meet the cutting of different materials. Its clamping adopts hydraulic vise to clamp, mainly through the hydraulic cylinder driving the jaw plate to clamp the workpiece. The jaws are clamped by a single jaw, and the screw rod cylinder structure. Moreover, the guidance of the scissor sawing machine is divided into a movable guide arm and a fixed guide arm. The former is moved manually. After the adjustment is completed, the locking of the guide arm is mainly done manually by the dovetail device. The top and sides of the guide base are all made of hard alloy, and there is also a pre-guide arm device, mainly to ensure the stability of the guide and prolong the service life of the saw blade. Moreover, it adopts a large and small double column structure, and the lifting of the saw frame is mainly driven by an oil cylinder.
In addition to the vertical sawing function of the angle sawing machine, the worktable can be rotated from 0 to 45 degrees. It can realize the bevel cutting of materials, and is suitable for steel structure manufacturers to cut various special-shaped steels. The cutting speed can be controlled hydraulically and there is no speed change. Moreover, the structure design of the guide block is scientific and reasonable, which extends the service life of the saw blade. The cutting edge of the top angle sawing machine is more stable and accurate, and the three-way hydraulic clamping device can be customized. Therefore, the angle saw can be clamped by hydraulic clamping when working, and the operation is more convenient.
Rimin Machinery grows with you
WeChat consultation
中文
Message
Sitemap
