The CNC band saw is a product that is operated through CNC programming. This type of product is used by many manufacturers and is widely used. We should all know it! Rimin Machinery’s product production has its own relatively professional team, so it is the manufacturer’s policy to provide customers with a good product, but no matter what product is used for a long time, there will be two differences in the future. This is a problem, so what problems will appear when the CNC band saw machinery is in use? Let's introduce the CNC band saw machine below.
Two common problems of CNC band sawing machine
1. Control failure of CNC band saw
1. The reset weak spring force of the AC contactor iron core is small, and the coil can be replaced without resetting.
2. The voltage is low and the iron core does not move, which can increase the operating voltage.
Second, the CNC band sawing machine presents noise
1. The guide block is too tight, the gap of the guide block can be adjusted
2. The coolant can be replaced if the coolant is improperly selected or the ratio is not suitable.
3. There are hard spots in the data, and the job can be rotated to a certain angle and then cut from the beginning.
4. The band saw blade speed is too fast and the feed amount is too large. The speed or feed amount can be lowered.
There are two kinds of problems when the CNC band sawing machine is in operation. Generally, manufacturers who have used this kind of CNC band sawing machine products should have encountered such problems too! In fact, we have found a way to deal with this problem, but the key is still to know the cause. We are a manufacturer of band sawing machines and circular sawing machine tools. There are various types of CNC band sawing machines wholesale. Customers who need these types of CNC machine tools can contact us by phone, 24 hours online.
WeChat consultation
中文
Message
Sitemap
